In good condition, the Team Issue is made using two pieces of 6061 T-6 aluminum tubing, with a wall thickness that was micrometered to 1.6mm thick. The primary grip section is miter cut to closely fit the cinch section at the time they are TIG welded together. The primary grip section is welded at a 15 degrees from handlebar perpendicular inward, toward the front tire. It has 2 1/4" inches of knurled surface centered between the ends. The secondary grip section is TIG welded to the primary section, so that it tips upward at a 14 degree angle as it bends further inward toward the tire an additional 53 degrees from the original 15 degrees welded into the primary grip section. The Team Issue bar ends come with Rodon plugs in the tubing and come in a Titanium Grey hard anodized finish. With their steel bolts and end caps, the pair weighs approximately 165 grams.